GM 4T40E, 4T45E Valve Body 1997-2001

This listing is for a Remanufactured GM 4T40E, 4T45E Valve Body, model years 1997-2001, with a Holley Large
Type EPC Solenoid and a Casting Number of #24209130. Please see the photos and illustrations below in our Technical Information section for useful tips and identification information.

This valve body is better than OEM, it features many upgrades to increase reliability over the standard OEM valve body.

These upgrades include: Upgraded TCC Regulator Valve, New EPC Solenoid, and New PSM.

PLEASE NOTE: There is a $50.00 Refundable Core Charge that is added at checkout. Once you remove your defective valve body and return it to us, the Core Charge will be refunded to you. For detailed instructions, please read the Core Charge section on our FAQs/Glossary page.

If you need help identifying the valve body you need, we can do a VIN# lookup for your vehicle to make sure you get the right part the first time. Please see the Technical Information/Identification Guide below for information on how to properly identify the valve body your vehicle needs. If you have questions or need assistance please contact us and we will do our best to assist you.

Above you can see the Holley large type EPC solenoid(1)found on the 1st(97-01) and 2nd(02-03) Design 4T40E Valve Body. First design valve body (97-01) has a hollow pressure regulator valve. Second design PR valves are solid (02-03). The separator plates used with the solid valve must have an orifice hole where indicated (2).