Land Rover JF506E Valve Body 1999-UP

This listing is for a remanufactured JF506E Land Rover Valve Body, years 1999-UP, which has been updated over the OEM version for increased reliability. The EPC Solenoid is brand new and all other solenoids are tested, rebuilt or replaced.

ATTENTION: This Valve Body CANNOT be interchanged with Mazda, Volkswagen, or Jaguar. It is for LAND ROVER ONLY! The Jaguar, Land Rover and VW valve bodies look identical except that the VW valve body has the OE VW logo cast into it. Of the nine solenoids used, only four have double o-rings on Jaguar/VW whereas Mazda has seven double O-ring solenoids. If you need a JF506E for a Volkswagen, Land Rover, or Mazda please contact us or see our store, we do carry them.

PLEASE NOTE: There is a $100.00 Refundable Core Charge that is added at checkout. Once you remove your defective valve body and return it to us, the Core Charge will be refunded to you. For detailed instructions, please read the Core Charge section on our FAQs/Glossary page.

If you need help identifying the valve body you need, we can do a VIN# lookup for your vehicle to make sure you get the right part the first time. Please see the Technical Information/Identification Guide below for information on how to properly identify the valve body your vehicle needs. If you have questions or need assistance please contact us and we will do our best to assist you.

 

In the picture above you can see the difference between the Mazda and VW/Audi, Jaguar, Land Rover valve bodies externally. As well as the solenoid locations. Note that even though the VW/Audi, Jaguar, and Land Rover valve bodies look the same externally, internally they are different and cannot be interchanged.




In the above photo you will see a detailed guide to the proper wiring connections for the JF506E Valve Body.





Please pay attention to the above photo. Due to the fact that some of the cores returned to us are
missing the Oil Baffle, the one we send you may not have one. Therefore we ask that you use the
Oil Baffle off of your old Valve Body. Do not worry, it will not harm the new rebuilt Valve Body.