BMW ZF 5HP30 Valve Body Rebuild and Return Service 1991-UP

This listing is for our Rebuild and Return Service on a BMW ZF5HP30 Valve Body, 5-Speed, model years 1991-UP. Due to the difficulty in obtaining cores for rebuild, we currently only offer our Rebuild Service on this model. We email you a shipping label, you send us your valve body, we rebuild it, update it and send it back to you.

Turn-around time is usually 3 days, call to check our current average turn around times. It spends one day on the testing table, tested on a pressure tester and a Superflow Dynamometer to make sure everything meets factory spec. and there are zero pressure leaks. The price above includes UPS Ground Shipping to and from our Rebuild Center.

When remanufacturing your valve body it is updated better than OEM. Valve bodies have: a ZF OEM Valve Body Kit, Pressure Regulator Section(Pressure Regulator Valve Bore is reamed and a Stainless Steel Bore Sleeve is installed to increase durability) and a complete ZF Spring Kit installed. Solenoids are demagnetized, cleaned, rebuilt and tested. Defective solenoids are replaced.

Please see the photos and illustrations below in our Technical Information section for useful tips and identification information. Please message or call us if you are interested in our rebuild service, we would be happy to answer your questions and address any concerns. Service is non-refundable.

Below you will find some useful information on identifying your valve body and repair/replacement guidance.

You COULD pay LESS, or you could do it RIGHT the FIRST time and make it your LAST TIME

   Top and bottom view of the ZF5HP30 Valve Body.

Above is a photo on the speed sensor we recommend replacing. There are two of them and can be found in our store.