This listing is for a Heavy Duty Deep Transmission Pan with 2 Quarts Extra Capacity for the GM 6L80, 6L80E Transmission, finished in a Black Powder Coat. This extra capacity heavy duty transmission oil pan fits GM 6 speed hydramatic 6L80, 6L80E transmissions. A magnetic drain plug and all mounting bolts are included with the pan. This pan has been designed for:
This pan has been installed on 6L80E Transmissions in 2007 and newer Chevrolet and GM trucks and SUVs, such as these vehicles:
Configurations vary so always check your vehicle. Verify which transmission you have and look for ground clearance and interference from frame cross members or exhaust components. Pan dimensions can be found below in our Technical Information section.
If you have skid plates, undercarriage protection or require a lower profile pan, check our store for the stock capacity version of this pan, part# 11087. Camaro, Corvette, G8, and Cadillac vehicles with the 6L80, 6L80E transmission will also use the stock capacity pan(part# 11087). This pan can be modified for pan filling, please call or email if you want this deep pan and to fill through the pan.
Loosening the exhaust pipe for installation: You might need to lower the exhaust cross over pipe to install this pan or do a service with the stock pan. Some customers recommend loosening the exhaust flanges at the manifolds with a crow's foot socket wrench.
This pan comes with a LIMITED LIFETIME WARRANTY, for complete details please see our Warranty section below.
WE ARE NOT RESPONSIBLE FOR YOU ORDERING A PART THAT DOES NOT FITYOUR VEHICLE. THE EBAY COMPATIBILITY CHART CANNOT BE TRUSTED TO BE 100% ACCURATE. Please seethe Technical Information/Identification Guide below for information on how to properly assure pan fitment. If you have questions or need assistance please contact us and we will do our best to assist you.
As always, if you have any questions please feel free to message us here on eBay. We have an ASE certified transmission tech, with 25+ years experience rebuilding transmissions, available to answer your questions.
The above photo shows the interior of the 6L80E Deep Pan. You can see the filter supports that are cast into the bottom of the pan to compensate for the increased depth. The pan is designed to use the stock filter and stock reusable gasket, please make sure the gasket is clean and free of any holes or nicks to avoid leaks.
The above photo shows the three bosses that are provided that can be machined for use with aftermarket sensors and gauges. One location is on the driver's or left side and the other two are on the passenger or right side. If you would like us to machines and tap a boss for you there is an extra $45.00 charge. The bosses can accommodate from 1/8 to 1/2 NPT. The bosses can also be used as alternate drain plug locations.
PML products carry a lifetime limited manufacturer's warranty. Our products have proven to be trouble free since we began making them in 2000. If the pan or cover you receive is determined to have some kind of manufacturing defect (i.e., machining problem, leak due to porosity in pan wall), PML will replace the part.
If you sell your vehicle with our part installed, we will honor the warranty with the new owner.
If you run a cover or pan into a boulder and it cracks or is damaged, well, there's nothing PML can help you with there.
Modifying our products voids the warranty.
Our products are designed to fit factory original equipment. However, in some applications, or because of the use of certain factory options and/or after market equipment, there may be clearance or fitment problems between our products and your vehicle components. PML provides dimensions and pictures so you can check your vehicle before ordering.
It is the responsibility of the vehicle owner and installer to install the part correctly and to ensure that there is no contact between the PML part and other moving or fixed vehicle components.
World Wide Specialty Parts and PML assumes no liability, expressed or implied, for damage or injury to persons or property.
This warranty does not cover: Removal and Replacement Labor Costs, Loss of time, Inconvenience or other Consequential Damage.