This listing is for Rebuild Service for a ZF 6HP26, 1st Generation Valve Body. Due to the difficulty in obtaining cores for rebuild, we currently only offer our Rebuild Service on this model. We email you a shipping label, you send us your valve body, we rebuild it and send it back to you. You get the same Lifetime Warranty we offer on all of our valve bodies.
Turn-around time is usually 3 days, call to check our current average turn around times. It spends one day on the testing table, tested on a pressure tester and a Superflow Dynamometer to make sure everything meets factory spec. and there are zero pressure leaks. The price above includes UPS Ground Shipping to and from our Rebuild Center.
When remanufacturing your valve body it is updated better than OEM. Valve bodies have: A Stainless Steel Bore Sleeve Installed with an Updated Pressure Regulator Valve. A New ZF Steel Separator Plate, and Sonnax End Plug Kit. Other Sonnax updates may be installed depending on wear and design level of the body. Solenoids are demagnetized, cleaned, rebuilt and tested. Defective solenoids are replaced.
Please see the photos and illustrations below in our Technical Information section for useful tips and identification information. Please message or call us if you are interested in our rebuild service, we would be happy to answer your questions and address any concerns. Service is non-refundable.
PLEASE NOTE WE ARE NOT RESPONSIBLE FOR THE PART NOT FIXING YOUR ISSUE. YOU CANNOT RETURN A PART ONCE IT HAS BEEN INSTALLED ONLY EXCHANGE IT. WE HIGHLY RECOMMEND YOU USE ANEXPERIENCED TRANSMISSION TECH TO INSTALL YOUR VALVE BODY. IF PROPER PROCEDURES ARENOT FOLLLOWED, MANY TIMES IT WILL SEEM LIKE THE NEW VALVE BODY IS FAULTY, GENERATINGFALSE ERROR CODES AND THE TRANSMISSION WILL REFUSE TO COME OUT OF "LIMP MODE" OR"FAILSAFE MODE." BE SURE TO CHECK INSTALL AND REPROGRAMMING PROCEDURES BEFOREINSTALLATION. As always, if you have any questions please feel free to message us here on eBay. We have an ASE certified transmission tech, with 25+ years experience rebuilding transmissions, available to answer your questions.